|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Product Bulletin OP803TX September 1996 Hi-Reliability NPN Silicon Phototransistor Types OP803TX/TXV, OP804TX/TXV, OP805TX/TXV Features *High reliability screening patterned *Each lot subjected to Group A & B Lot *Lensed for high sensitivity *Mechanically and spectrally matched to the OP235TX/TXV and OP236TX/TXV series IREDs Acceptance after MIL-PRF-19500 Absolute Maximum Ratings (TA = 25o C unless otherwise noted) Storage Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -65o C to +150o C o o Operating Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . -55 C to +125 C Lead Soldering Temperature [1/16 inch (1.6 mm) from case for 5 sec. with soldering o (1) iron] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 240 C Collector-Emitter Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 V Collector-Base Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 V Emitter-Base Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.0 V Emitter-Collector Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.0 V (2) Power Dissipation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 250 mW Notes: (1) RMA flux is recommended. Duration can be extended to 10 sec. max. when flow soldering. (2) Derate linearly 2.5 mW/o C above 25o C. Description Each device in the OP803, OP804 and OP805TX/TXV series consists of a high reliability NPN phototransistor mounted in a lensed, hermetically sealed, TO-18 package. All devices are 100% screened per Table II of MIL-PRF-19500. Typical screening and lot acceptance tests are provided on page 13-4. The OP803, OP804 and OP805 TX/TXV series lensing creates an acceptance half angle of 12o< D> measured from the optical axis to the half power point. The series can be matched with either a solid state infrared source, such as the OP235 and OP236 TX/TXV series IREDs, or can be used to sense infrared content in a visible light source, such as a tungsten bulb or sunlight for automatic brightness control. Optek Technology, Inc. 1215 W. Crosby Road Carrollton, Texas 75006 13-34 (972) 323-2200 Fax (972) 323-2396 Types OP803TX/TXV, OP804TX/TXV, OP805TX/TXV Electrical Characteristics (T A = 25o C unless otherwise noted) Symbol Parameter On-State Collector Current OP803TX,TXV OP804TX,TXV OP805TX,TXV Collector-Emitter Dark Current Collector-Base Breakdown Voltage Collector-Emitter Breakdown Voltage Emitter-Base Breakdown Voltage Collector-Emitter Saturation Voltage Rise TimeOP804TX,TXV OP805TX,TXV Fall TimeOP804TX,TXV OP805TX,TXV Min 4.0 7.0 15.0 Typ Max Units mA mA mA nA A V V V Test Conditions VCE = 5.0 V, Ee = 5.0 mW/cm2(3) VCE = 5.0 V, Ee = 5.0 mW/cm2(3) 2(3) VCE = 5.0 V, Ee = 5.0 mW/cm VCE = 10.0 V, E e = 0 VCE = 10.0 V, E e = 0, TA = 100o C I C = 100 A, I E = 0, Ee = 0 I C = 100 A, I B = 0, Ee = 0 I E = 100 A, I C = 0, Ee = 0 I C = 0.4 mA, Ee = 5.0 mW/cm2(3) VCC = 30 V, I C = 1.00 mA, RL = 100 IC(on) 8.0 22.0 100 100 I CEO V(BR)CBO V(BR)CEO V(BR)EBO VCE(SAT) tr tf 30 30 5.0 0.40 10.0 15.0 10.0 15.0 V s s (3) Light source is an unfiltered tungsten lamp operated at a temperature of 2870 K. @TOPICS = Optek reserves the right to make changes at any time in order to improve design and to supply the best product possible Optek Technology, Inc. 1215 W. Crosby Road Carrollton, Texas 75006 (972)323-2200 Fax (972)323-2396 13-35 |
Price & Availability of OP803 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |